Best budget floor jacks & jack stands

A floor jack only lifts your vehicle; jack stands hold it securely while you work. Never get under a vehicle supported by a jack alone. Jack stands are not optional—they are essential safety equipment for any repair or maintenance task that requires you to work beneath a raised vehicle. In this guide, we rank five budget-friendly floor jack and jack stand picks by saddle height, lifting capacity, stability, build quality, and overall value, helping you choose dependable equipment without overspending.

 

As an Amazon Associate I earn from qualifying purchases.

How we judge

  • We evaluate floor jacks by their lifting capacity, build quality, stability, lifting range, and ease of use. A floor jack typically lifts only one end of a vehicle—roughly half of its weight—not the entire vehicle at once. That is why the jack’s rating should provide an appropriate safety margin for the portion of the vehicle being lifted, and why the vehicle should always be supported with properly rated jack stands before anyone works underneath it.
  • We also check jack stand ratings carefully because manufacturers may list capacity per pair or per stand. The label should make this clear; a 3-ton pair is not the same as two individual stands rated at 3 tons each. We use standard weight conversions when comparing ratings: one US short ton equals 2,000 lb, so 3 US tons equals 6,000 lb. One metric tonne equals approximately 2,205 lb, not 6,600 lb. Three metric tonnes are 6,600 lb, the bigger number some badges quietly use.

    When comparing floor jacks and jack stands, focus on the measurements and safety ratings that matter in real use. Brands do not always measure saddle height the same way, so the lowest saddle height that actually fits under your car—not simply the number listed on the box—is what counts. Also look beyond a basic claim of compliance: a full ASME PASE-2019 rating means more than a general statement that a product meets standards, as it indicates the equipment has been evaluated against the applicable performance and safety requirements for portable automotive service equipment. Always use jack stands on solid, level ground and never rely on a floor jack alone to support a vehicle.

     

    A dual pump only gives a quick rise to the load, not extra lifting power. We also favor brands that sell seal kits and will still exist when a warranty is needed, because a jack you cannot repair is a throwaway.

 

Number 1 pick: Arcan 3-Ton Quick Rise Aluminum Floor Jack (A20019)

The Arcan 3-Ton Quick Rise Aluminum Floor Jack, model A20019 (formerly ALJ3T), is our number one pick for lifting cars, trucks, and SUVs safely and efficiently. This lightweight yet durable aluminum floor jack has a 3-ton (6,000-pound) lifting capacity, making it suitable for many home garages and professional shops.

Its 3.75-inch minimum saddle height is the lowest of any jack in its class, allowing it to fit beneath many low-clearance vehicles. The quick-rise dual-pump system brings the saddle into contact with the vehicle quickly, helping reduce the time needed to begin lifting.

Built for dependable use, the A20019 combines a strong aluminum frame with a low-profile design and easy maneuverability. It is a practical choice for drivers and technicians who need a capable floor jack that can reach low vehicles without sacrificing lifting capacity.

 

Watch for the sale: its street price currently runs above the usual budget band, and it lives lower on sale. At only 56 lb it loads easily into a truck bed. The honest tradeoff is that its 18-inch maximum lift is short for lifted trucks, and it carries only a 1-year warranty.

VEVOR 3 Ton Low Profile Aluminum & Steel Racing Jack

 

The VEVOR 3 Ton Low Profile Aluminum and Steel Racing Jack is designed to lift cars and other compatible vehicles for tire changes, maintenance, and repairs. Its low-profile design helps it fit under vehicles with lower ground clearance, while its 3-ton capacity supports up to 6,600  lb.

This racing jack offers a lifting range of 3.55 inches to 19.69 inches, providing clearance for a variety of service tasks. Dual pistons help deliver faster lifting, reducing the number of pumps needed to raise the vehicle.

Built with aluminum and steel components, the jack balances durability with portability. At 63 lb, it is substantial enough for garage use while still manageable to move and position when needed.

 

Owner reports are the warning here: some owners report pressure loss and creeping down under load. Its 3-ton rating is 6,600 lb in metric tonnes, not the 6,000 lb US-ton rating of the other jacks here, and its safety claim says ASME without naming the PASE standard.

 

 

BIG RED T83006 Torin Trolley Jack with Extra Saddle

The BIG RED T83006 Torin Trolley Jack with Extra Saddle is a 3-ton steel trolley jack built for drivers who need a capable lifting tool without a premium price tag. It is the true budget pick in this guide, offering sturdy construction and practical features for routine maintenance, tire changes, and other garage jobs.

With the tallest lift range here, this jack raises vehicles from 5-7/8 inches to 20-7/8 inches. That extra height makes it especially useful for trucks and SUVs, where greater ground clearance can make a standard low-lift jack less effective. The included extra saddle also adds versatility when lifting different vehicle types.

While it is a more basic option than some higher-priced hydraulic jacks, the Torin T83006 delivers solid value for occasional home use. Its 3-ton capacity is suitable for many cars, crossovers, trucks, and SUVs, making it a dependable choice for shoppers who want an affordable, high-lifting trolley jack.

 

The tradeoff starts at the nose: its 5-7/8-inch minimum saddle height shuts out low cars entirely. Its single piston makes it slow to lift. A minority of owners report early hydraulic failure, so test it under load early and keep the receipt.

Pro-LifT F-767 2-Ton Low Profile Floor Jack

The Pro-LifT F-767 2-Ton Low Profile Floor Jack is designed for lifting cars with limited ground clearance. Its low-profile saddle reaches as low as 3.5 inches, making it a practical choice for many low-riding vehicles. With a 2-ton lifting capacity, it can handle a wide range of passenger cars while remaining easy to position under the vehicle.

At only 30 lb., the F-767 is lighter and more portable than many traditional floor jacks. Its compact design makes it convenient to move around the garage, keep in a vehicle, or store when not in use. The jack’s steel construction and built-in safety valve support dependable operation during routine maintenance tasks.

The Pro-LifT F-767 is a straightforward option for drivers and DIY mechanics who need a compact jack for oil changes, tire rotations, and other basic service work. Its low entry height, manageable weight, and 2-ton capacity make it especially useful for low-clearance cars. Always use properly rated jack stands before working beneath a raised vehicle.

 

Its 2-ton rating is a car-only rating: a full-size truck front end eats the whole number. And its 14-inch maximum lift leaves little working room, so check the lift height against the job before you buy.

Pro-Lift T-6906D 6-Ton Double-Locking Jack Stands (pair)

The Pro-Lift T-6906D Jack Stands are designed to support a raised vehicle after it has been lifted with a jack. Sold as a pair and rated for 6 tons per pair, they provide a stable resting point for vehicle maintenance, inspections, and repairs.

These stands offer an adjustable height range of 16 inches to 23.5 inches, giving them the clearance needed for many trucks, SUVs, and other larger vehicles. Their ratcheting center posts make it easy to set the support height for the job at hand.

For added security, the T-6906D features a double-locking mechanism that helps keep the stand securely positioned once adjusted. Always use jack stands on a firm, level surface and follow the manufacturer’s weight and safety guidelines.

 

The tradeoff is height: their 16-inch minimum height is too tall for sedans. We name the Torin T43002A 3-ton pair in the open as the car-height companion, rather than pretending one stand does both jobs. Their double lock is a handle lock plus a mobility pin.

Bottom line

Buy a floor jack that matches your vehicle’s weight, lift points, and required lifting height, then pair it with jack stands rated to safely support the load. Never get under a vehicle supported by a jack alone: once the vehicle is raised, place it securely on properly positioned jack stands before working underneath.

If you buy only one piece of equipment first, choose a quality set of jack stands—but remember that you still need a suitable jack to lift the vehicle safely. Inspect both tools before every use, work on a level, hard surface, and follow the manufacturer’s instructions for capacity and placement.

Left out on purpose. Harbor Freight’s Daytona and Pittsburgh lines are category value leaders, but they are Harbor Freight house brands and do not have an official first-party Amazon presence, so the best option is to purchase them in person at a Harbor Freight store or directly through Harbor Freight’s website. The 2020 Pittsburgh jack-stand recall of about 1.7 million units is why every stand recommended here double-locks. Hein-Werner is the about $500 US-assembled pro step-up.